Concrete Polishing Additives

Power Refinement Hardener
hardener-572-351
  • Developed in the US
  • Fast acting formula : needs only 30 minutes from application to continue polishing
  • American LEEDS standard certification 2009 version 3
  • VOC's 5%, rated as "low" by EU regulations
  • Application rate : 20m2 per litre.
  • Lithium based
  • Non flammable
  • Odourless 
  • Biodegrable
Power Refinement Sealer
sealer-949
  • Developed in the US
  • Fast acting formula : needs only 30 minutes from application to continue polishing
  • American LEEDS standard certification 2009 version 3
  • VOC's 5%, rated as "low" by EU regulations
  • Application rate : 60 m2 per litre.
  • Lithium based
  • Non flammable
  • Odourless
  • Biodegrable
Mitec Penetrating Stain Guard 104
sealer 104
Designed to deliver the ultimate protection for masonry surfaces
  • Premium solvent based, penetrating (Non Topical) Stain Guard that is totally breathable.
  • Natural finish for interior and exterior use
  • Will not affect the slip resistance of the surface
  • Maximum level of protection
  • Particularly effective against oil/grease or in extremely high traffic areas
  • not affect the slip resistance of the surface
  • Matt/ Satin Finish
  • Coverage up to 100m2/L
  • For masonry, granite, marble, porcelain, natural stone, concrete, pressed pavers and reconstituted stone.
  • Available in 1, 4, 20 Liter containers.
Rapid Surface Filler
Watch our demonstration:
jpeag quick mender -500
The preferred method of pit and crack filling for many American Concrete Floor Polishing Contractors!
  • Ultra-Low Viscosity will penetrate the smallest pin holes in the concrete for a permanent bond.
  • Working time is 3-4 minutes, tack free in 15 minutes, can be grinding in only 30 minutes!
  • 15m2 to 25m2 coverage per litre depending on the condition of the surface.
  • Minimum surface preparation required. Just remove dust and moisture.
  • 25-30Mpa compressive strength after 30 minutes.
  • Good chemical resistance.
  • Easy to apply.
quickmender (2)-22-809

Available size : 19 L pails, a two part 50/50 mix required.

Please note: The product is clear so can be tinted if needed

ABOUT US

Absolute Diamond Blades Ltd aims to help diamond tool operators get the most out of their diamond blades.

READ MORE
 

WHAT’S NEW

Take a look at our latest tools and find out how they can make your job easier. 

VIEW MORE
 

CONTACT US

Phone: 0800 425233
Email:  sales@absolutediamondblades.co.nz