Concrete Saws

The all-new Makita 40V x2 (80V) XGT Brushless 355 mm (14") Power Cutter! The CE001g eliminates the hassles of petrol with lower noise, reduced maintenance and zero emissions allowing for use in indoor environments. Its Makita built Brushless Motor is powered by two 40V XGT® batteries.

Active feedback sensors, shuts down the tool in the event of kickback Advanced safety protection with the electric brake and extremely low vibration of only 2.0m/s² Massive maximum cutting depth of 127mm at a rapid 5,300rpm Water resistance of IPX4 for increased protection against moisture ingress Water supply adaptor for water suppression during masonry cuts

• Blade diameter - (14") 355mm
• Cutting capacities - 127mm
• No load speed - 5,300rpm
• Overall dimensions - 786mm
• Net weight (skin) - 10.3kg
• Sound Level - 108.7dB
• Continuous rating input - 3,600W
• Voltage - 40V X2 (80V)

The all-new Makita 18V x2 (36V) LXT Brushless 230 mm (9") Power Cutter! The DCE090 eliminates the hassles of petrol with lower noise, reduced maintenance and zero emissions allowing for use in indoor environments. Its Makita built Brushless Motor is powered by two 18V LXT® batteries.

Active feedback sensors, shuts down the tool in the event of kickback Advanced safety protection with the electric brake and soft start Massive max. cutting depth of 88mm at a rapid 6,000rpm XPT - increased protection against dust & moisture ingress Water supply adaptor for water suppression during masonry cuts

• Blade diameter - 230mm (9")
• Cutting capacities - 88mm
• No load speed - 6,600rpm
• Overall dimensions - 565x248x285mm
• Net weight - 6.4kg (with 2 x 6ah batteries
• Sound Level - 103dB(A)
• Voltage 18VX2 (36V)

Featuring Stratified Air Scavenging (SAS) which reduces fuel consumption by 20%. Lower noise at 97 dB(A) and smoother idle for continuous operation & Smaller hub and drive wheel assembly increases maximum cutting depth to 130mm

• Power output - 3.2kW
• Wheel diameter - 350mm
• Max cutting depth - 130mm
• Net weight - 8.8kg

High performance 2 Stroke Motor Producing a powerful 3.8kW / 5.1HP. Complete with 5 Stage air filteration system & Optimum Vibration dampening to Prevent Operator Fatigue

• Engine displacement - 73cc
• Power output - 3.8kW
• Wheel diameter - 350mm
• Max cutting depth - 125mm
• Net weight - 10.0kg

4 Stroke Environment-Friendly and Cost-Saving 4-Stroke Engine with Low-vibration system with damper springs to absorb vibration from engine to integrated front and rear handles. Easy start-up with Automatic decompression, Primer pump and on/off choke combination switch with automatic half-throttle lock.

• Engine displacement - 75.6cc
• Power output - 3.0kW
• Wheel diameter - 355mm
• Max cutting depth - 125mm
• Net weight - 12.2kg

405mm (16") power cutter designed for continuous heavy duty use. Perfectly balanced and only weighs 10.6kg Easy start up with On/Off choke combination switch, automatic half throttle lock & up to 15% less fuel consumption with SLR (scavenging Losses rejection) Complete with Tool-less Filter cover & easy change 2-stage air filtration system Optimum vibration dampening

• Engine displacement - 81cc
• Power output - 4.5kW
• Wheel diameter - 405mm
• Max cutting depth - 147mm
• Net weight - 10.6kg

The K770 is outfitted with an X-Torq® engine that reduces emissions up to 75% and lowers fuel consumption by 20%. Other important features include SmartCarb & DuraStarter®, a dust-sealed starter that boosts reliability and product life

• Engine displacement - 73.5cc
• Power output - 3.7kW
• Wheel diameter - 350mm
• Max cutting depth - 125mm
• Net weight - 10.1kg

All the features of the K770 plus OilGuard Technology. Oilguard is specially designed to prevent engine damage resulting from an incorrect oil-fuel mixture. The K 760 Oilguard uses specially colored OilGuard oil, developed specifically for dusty environments like construction sites and ideal for air-cooled two-stroke engines. An optical detection system indicates if there is a sufficient amount of the correct type of oil in the fuel. It is also possible to use standard two-stroke oil in a K 760 Oilguard, as the OilGuard feature can easily be deactivated.